Ethical Red Burgundy Sandstone
The “Ethical Red Burgundy Sandstone” is one of our most exotic stones. This high-quality stone is quarried on top of the hills of the North of Spain.
This stone is known for its beautiful reddish colour and unique texture, which lends a warm rustic look to any construction or landscaping project.
In addition to its natural beauty, this red sandstone is also notable for its petrographic composition. Its hardness and durability makes this stone a perfect fit for any kind of masonry, commercial or hard landscaping project. In addition, the Ethical Red Burgundy Sandstone has got very good resistance to frosting, being a very reliable option for very cold countries.
This stone has been used in the construction of many historic buildings and monuments. Combining durability and aesthetics in an environmentally friendly material, this red stone is an excellent choice for your next construction or decorative project.
Quartzarenite
Technical Data Sheet
TBD
| Test | Standard | Result |
|---|---|---|
| Water absorption at atmospheric pressure | UNE-EN 13755:2008 | 2,0% |
| Water absorption by capillarity | UNE-EN 1925:1999 | 9,01 g/(m^2)s^0,5 |
| Apparent Density | UNE-EN 1936:2007 | 2480 kg/m^3 |
| Open porosity | UNE-EN 1936:2007 | 4,6 % |
| Abrasion resistance | UNE-EN 14157:2005 / UNE-EN 1341:2002 | 16,0 Mm |
| Slip resistance (Dry/Wet) | UNE-EN 14231:2004 | Usrv: Dry 79 / Wet 73 |
| Frost resistance. Fluxural strength after 12 cycles | UNE-EN 12371:2011 | Average value: 11,8 Mpa |
| Deviation: 1,5 Mpa | ||
| Min expected value: 8,0 MPa | ||
| Frost resistance. Fluxural strength after 48 cycles | UNE-EN 12371:2011 | Average value: 10,1 MPa |
| Deviation: 1,1 MPa | ||
| Min expected value: 8,0 MPa | ||
| Frost resistance after 48 cycles | UNE-EN 12371:2011 | Average value: 126 MPa |
| Deviation: 15 MPa | ||
| Min expected value: 97 MPa | ||
| Uniaxial Compressive Strength | UNE-EN 1926:2007 | Average Value: 150 MPa |
| Deviation: 28 MPa | ||
| Min expected value: 93 MPa | ||
| Flexural strength under concentrated load | UNE-EN 12372:2007 | Average value: 12,9 MPa |
| Deviation: 1,0 MPa | ||
| 10,8 MPa | ||
| Breaking load for anchors | UNE-EN 13364 Slurry thickness = 3 cm | Average value: 2050 N |
| Deviation: 400 N | ||
| Min expected value: 2000 N |